Midhun – Water2Buy – Water Filtration Made Easy

SLOW/ NO WATER FLOW FROM FAUCET

The most common reason for the water flow to slow or stop on our reverse osmosis unit would be a filter change is needed Blocked filters – replace filters Buy Now Step #1 Bent pipes – Check if any pipe on the system is not bent or squeezed. Step #2 RO membrane inserted incorrectly – Important is […]

Read More

WATER TASTY BAD / CLOUDY

The most common reason for the water to taste bad in the reverse osmosis unit would be a filter change is needed Exhausted filters – replace filters Buy Now Step #1 Unit not used in long time –empty and fill up storage tank twice so water new water moves through RO system Step #2 CLOUDY WATER […]

Read More

LEAKING FILTER/ MEMBRANE HOUSING

The most common reason for a filter housing to leak would be the O’Ring is not in place right What we do recommend you to take out the O’Ring and put something like vaseline around the O’Ring and then place into the housing and tighten it with the key Check RO parts Buy Now

Read More

Storage Tank Not Filling Up

The most common reason for the water flow to slow or stop on our reverse osmosis unit would be a filter change is needed Blocked filters – replace filters Buy Now Step #1 Storage tank valve closed – Open the storage valve tank Step #2 Low pressure in the storage tank – Close the inlet valve and […]

Read More

SYSTEM DRAINS CONSTANTLY

The most common reason for water going to waste constantly would be Unit installed not properly – check if all pipes are connected in right connector. Please watch the video for better Understanding Step #1 Step #2 Step #3 Step #4 Step #5

Read More

HOW THE WATER SOFTENER WORKS

On the Keypad hold the button down the menu button until the screen unlocks. When the screen is unlocked you will see a number underneath, the time that looks like 00.55T [ The number may be different for you ] This is the remaining capacity in your water softener before it needs to do its next […]

Read More