We are very sorry to hear that water softener is beeping when it is doing a regeneration
A part would need to be change on the water softener
If you email us at [email protected] we will get the part send out to you
How to change the part
In front of control head on front mask in the middle is knob. This knob is turning around 360° during regeneration. In the middle of the knob is screw under the sticker. If you unscrew it then you are able to remove the knob. Then on right and on left side of head is always one screw. Unscrew these two screws and then remove front mask. Then you see motherboard so you can swap it.