Study shows water softeners can save energy and money – Water2Buy – Water Filtration Made Easy

Study shows water softeners can save energy and money

Water Heaters
Both the gas and tankless, or indoor instantaneous, gas hot-water heaters that were operated on softened water maintained the original factory efficiency rating, the news release says.

For gas heaters, the study found that for each 5 GPG of water hardness, there is a 4% loss in efficiency and 4% increase in cost when using 190 L/d (50 gal/d). For 30 GPG of hard water, this equates to 24% loss in efficiency in a 190-L/d (50-gal/d) heater and 48% loss of efficiency in a 380-L/d (100-gal/d) heater, compared to soft water.

The study found that tankless heaters failed to function after an equivalent of 1.6 years of 26-gpg hard-water use because of scale plugging in the downstream plumbing. The researchers found that using softened water in place of 20 GPG of hard water equates to a 34% savings and in place of 30 GPG of hard water equates to a 47% savings in the tankless heaters, the news release says.

The study found that up to 14 kg (30 lb) of calcium carbonate rocklike scale can accumulate in electric heaters over time and cause increased operating temperature, resulting in shortened life. Each 5 GPG of water hardness causes 0.4 lb of scale accumulation each year in electric storage-tank household water heaters, reducing the heaters’ performance.

Showerheads and Faucets
Faucets using softened water “performed well throughout the study; nearly as well as the day they were installed,” the news release says. Faucets on hard water could not maintain the specified 4.73-L/min (1.25-gal/min) flow rate because of scale collection in the strainers. The strainers on faucets using hard water were almost completely plugged after 19 days, the news release says. Showerheads using hard water lost 75% of flow rate in less than 18 months of use, the news release says.

Dishwashers and Washing Machines
Dishwashers and washing machines were operated for 30 days and on soft and hard water. Units using soft water were almost completely free of any water-scale buildup and were described in the report as able to be cleaned up to look like new. The appearance of the inside of the units using hard water showed the need for de-liming and cleaning due to the buildup of scale and deposits.